Updating bios flash

Now that I’ve explained the reasons for and against updating your BIOS, let’s talk about how to figure out whether there is an update for your BIOS.

All intellectual property rights, including without limitation to copyright and trademark of this work and its derivative works are the property of, or are licensed to, GIGA-BYTE TECHNOLOGY CO., LTD.

Because there are some methods for reactivating your PC. Try this: Please note: while testing, you should remove all unnecessary additional hardware components from your PC (not on Laptops)! removed the battery and waited a whole night, still blank.

Depending on the method, we would need again a bootable DOS media, from which we will try to make a blind BIOS update. You only need: 1 CPU, 1 RAM 1 Graphic adapter, Power supply unit mainboard. MB detects NO-RAM and beeps, all beeps are normal, it simply does not display on screen.

Note: the BIOS manufacturer AWARD have been taken over in 1998 by his competitor PHOENIX. - First aid Attention: this Howto describes only a BIOS update according to standard, how it should work on most mainboards with AMI-BIOS, AWARD-BIOS or PHOENIX-BIOS. But now I learn that even with no video on the monitor, you can boot into DOS with a BIOS flash tool on the booting media!

So do not be surprised if you find both company names together on the BIOS setup screen. the last chance is to buy a new BIOS-Chip, or to reprogram the old BIOS-Chip. Preparation - Create a safe environment for a BIOS-Update 2. I cannot guarentee that it will work on your PC and I assume no liability for any damages! I even tried to extract the BIOS update utility from Sony that updated me to the latest BIOS in the first place and I don't see the BIOS in the exe file to replace. That's [email protected]: Thank you for the quick reply!

Leave a Reply